wtw DIQ/S 182-XT-4, Руководство по эксплуатации

Страница: 89 / 152

System 182-XT-4 The SETTINGS menu
5 - 3 ba75753e06 12/2014
Inactive sensor datasets An inactive dataset for an IQ sensor arises if the DIQ/S 182-XT-4
receives no signals from an IQ sensor that is already registered.The
Error display appears on the measured value display instead of a
measured value.
An inactive dataset can be reactivated by assigning it to, for example,
an IQ sensor of the same type (see section 8.3.2). All settings are
retained. If these data are no longer required, they can be erased. All
the settings belonging to this IQ sensor as well as any links with outputs
are deleted by this action.
Procedure: Deleting
inactive datasets
6 Use
w
and
g
to select and confirm the S0x Sensor menu
item (corresponding to sensor number).
The following note appears:
If the measuring mode or measuring range is changed, the
links of the sensor are erased. .
7 If you want to continue, press
g
.
The setting table of the sensor is displayed.
8 Edit the setting table as described in section 4.3.2.
To accept all settings, highlight the Save and quit menu
item at the lower end of the setting table and press
g
. If
you exit the setting table via
m
,
e
/Quit or the Quit menu
item, all changes are ignored.
1 Open the SETTINGS menu with
s
.
2 Using
w
and
g
select and confirm the S0x Sensor menu
item (corresponding to sensor number).
If the dataset is inactive, the following display appears: