Original Operating Instructions
BATx0280-ES-1-400-1 (Outdoor)
Operation
O_BATx0280-ES-1-400-1_(Outdoor)_V1.3_GB
Page
48
of
69
5 Operation
5.1
User Interfaces
The product has two user interfaces:
•
Modbus TCP interface
•
Ethernet/EtherCAT interface
5.2
Operating Modes
The operating modes and switching between them are carried out by external control
via the Ethernet interface. Controlling the product via the Ethernet interface is
described in the
Interface Description
.
Error monitoring is active in each operating state. If an error occurs, all functions of the
product are stopped automatically. An error message is available via the Modbus TCP
interface. When the cause of the error is eliminated, the product must be reset via the
higher-level control to restart operation.
5.3
Enable Switch
Pressing the Enable switch opens the AC and DC circuit breakers.
When all possible errors are eliminated, the Enable switch may be pulled out. The
product restarts operation after the Enable switch has been pulled out and the product
has been reset by means of the higher-level control.
Содержание BAT 0280-ES-1-400-1 Series
Страница 69: ......
