WSTECH BAT 0280-ES-1-400-1 Series Скачать руководство пользователя страница 26

Страница: 26 / 69

Original Operating Instructions
BATx0280-ES-1-400-1 (Outdoor)
Installation

O_BATx0280-ES-1-400-1_(Outdoor)_V1.3_GB

Page

3.4

Installation Site

DANGER!

Danger to life due to fire or explosion!

Unsuitable installation sites can cause fire or explosion. This may
cause damage to the product and result in serious injury or death.

•

No installation in potentially explosive atmospheres.

•

No installation on inflammable materials.

•

No installation in atmospheres, such as in the presence of

inflammable materials.

WARNING!

Danger to life due to the product tipping over!

When installed on an uneven foundation, the product can tip over.
This may cause damage to the product and result in serious injury or
death.

•

Wear suitable personal protective equipment for all work on the

product.

•

The installation must be done on a stable and even foundation.

•

The foundation must be able to support the weight of the

product.

NOTICE

Damage to the product due to overheating!

Insufficient cooling air can lead to damage or overheating of the
product.

•

Ensure that sufficient cooling air at the installation site.

Содержание BAT 0280-ES-1-400-1 Series






































































Результаты поиска

Содержание BAT 0280-ES-1-400-1 Series

Отзывы:

Похожие инструкции для BAT 0280-ES-1-400-1 Series

Бренды по названию

Популярные бренды

WSTECH BAT 0280-ES-1-400-1 Series, Руководство по эксплуатации

Результаты поиска

Содержание BAT 0280-ES-1-400-1 Series

Отзывы:

Похожие инструкции для BAT 0280-ES-1-400-1 Series

Бренды по названию

Популярные бренды