600-00174-001
Rev. 03, 13 May 2008
15
WSI AV-300/350 Installation Manual
Table 1-F: Sample Description of Work Accomplished
8. Description of Work Accomplished
(If more space is required, attach additional sheets. Identify with aircraft nationality and
registration mark and date work completed.)
A. The following equipment and components were installed:
1. The WSI AV-300/350 receiver was installed in (position in the aircraft) according to
instructions in Installation Manual, P/N 970-0300-IM, dated (Insert date & revision
of manual), and guidance in FAA Advisory Circular 43.13-1( ). The Antenna is
installed at (position on the aircraft) in accordance with (guidance used to install the
antenna).
2. An electrical load analysis was performed and found that the continuous load on the
alternator (generator or other supply) does not exceed 80% of capacity.
3. A complete operational test was performed according to WSI AV-300/350
Installation Manual, P/N 970-0300-IM, dated (insert date & revision of manual). The
equipment performed satisfactorily and did not adversely affect existing components
or systems in the aircraft as required by 14 CFR 23.1301 (or 14 CFR 25.1301, 14
CFR 27.1301, or 14 CFR 29.1301 as applicable).
4. The aircraft equipment list was revised to reflect these changes; weight and balance
data were revised and placed in the aircraft records. A WSI AV-300/350 Pilot
Operating Handbook, P/N 970-0350-PG dated (insert date & revision of Handbook),
and (insert associated application handbooks as appropriate) were placed in the
aircraft.
5. Installed Instructions for Continued Airworthiness for the 700-00159-( ) Receiver in
the Aircraft Records, Avidyne Document AVSSG-008 (insert revision level of the
ICA).
Equipment installation procedures do not differ significantly among various aircraft. The
installation and operation of the WSI AV-300/350 does not materially affect aircraft operation or
performance. WSI Inc. assumes no responsibility for alterations to the airframe.
With appropriate aircraft certification (such as field approval or STC), the WSI AV-300/350 is
eligible to be installed in small or transport category aircraft (United States 14CFR Parts 23, 25,
27 and 29).
