WINGLINE
MOUNTING INSTRUCTIONS
11
10
July 2014 Misprint and technical changes reserved. © by WO&WO Art.-Nr.: 930113_DE
WWW.
WoundWo
.COM
3.2. adjusting end positions/finishing the mounting of the drop bar holder
The end positions of the awning are preset in the factory.
If the inclination is changed, a correction may be necessary.
•
Fully extend awning and check switch-off point.
On the inner side, mount the drop bar holder washers and
nuts. Tighten firmly for definite fixing of the drop bar holder
in the drop profile!
•
Wind in awning to the back end position.
Also check that arms fold in parallel.
•
Correct the back end position according to the motor
adjustment instructions.
The arms should touch the cross tube slightly at the
buffers and the drop profile should be in the position
indicated on the right.
Post 2600 mm
Post 3000 mm
Post 3400 mm
System height in mm
projection
