ECRESO FM 100/300 W, user manual– 06/2015
Page 28
Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – 33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 –
www.worldcastsystems.com – [email protected]
4.3.
Using the PC application
4.3.1.
Connecting with the control software application
1.
On the PC, start the control software. This is a set-up tool that will allow you to quickly set and test your
transmitter. It is available on the supplied CD.
On the transmitter’s page, click the control interface link to download the zipped file to your PC.
Extract the .exe file. You do not need to install it, simply double-click on ENGI_REV_xxx.exe to launch the
application.
2.
Select the serial port connected to the ECRESO FM, and the port speed (9600 for the front panel connector).
4.3.2.
Setting the transmitter
1.
Set the power (in W), the frequency (in MHz)
and enable the RF.
2.
To send a parameter value to the transmitter, click the login button;
no password is set in factory. Click the
button to the right of
the text zone.
3.
A set of buttons give access to other parameters. Click on one of
them to open a window displaying associated parameters. The
“Audio Input” and “Modulator” windows will enable input and MPX
configuration.
4.3.3.
Input selection
The input can be set to:
Line1 for the analog inputs (see sections 4.3.4 to 4.3.6)
Line2 for the AES (see sections 4.3.4 to 4.3.6)
MPX1 and MPX2 inputs (see sections 4.3.3 and 4.3.6)
Player: µSD card (with Communication Pack only)
Internal generator
