ECRESO FM 100/300 W, user manual– 06/2015
Page 147
Head Office : Parc d’activites Kennedy - 20, avenue Neil Armstrong – 33700 Bordeaux-Merignac (France)
Tel +33 (0)5 57 928 928 – Fax +33 (0)5 57 928 929 –
www.worldcastsystems.com – [email protected]
With an IP connection but no personal EMR account number, data is sent to the EMR server. If you wish to
deactivate data recording, uncheck the ‘Logging’ check box.
EMR Server
Check the box to enable EMR.
Enter the IP address of the EMR server (or web address)
Save the configuration and click the Test button to check there is proper communication between your
transmitter and the EMR server.
For more information about using EMR, please see chapter 10.
Local storage of readings
Transmitters in version 1.2.2 minimum and with a µSD card automatically store data for the after sale services. In case
of issue, this data can then be analyzed for a better diagnosis (see section 1.2.2).
Please refer to parameter descriptions section 5.15 for more details on µSD card management.
The indicators show:
Logging Enabled
Logging on the µSD card is disabled (older transmitters)
Logging on the µSD card is enabled
Logging Failure
No logging fault
Logging failure on the µSD card
SD Card Present
µSD card not present
µSD card present
SD Card Mount
µSD card ready to unmount
µSD card is mounted
SD Card Fault
µSD card ok
µSD card alarm
9.7.
About
Click
to open this window which displays information
regarding the web application.
It also gives you access to the chat window (see next section).