General power tool safety warnings
This appliance is not intended for use by persons (including children with
reduced physical, sensory or mental abilities or lacking experience and/
or knowledge, unless they are supervised by a person responsible for
their safety or are instructed by these persons on the use of the appliance.
Children should be supervised, to ensure that they do not play with the
appliance.
Check the power cord and mains plug regularly for damage. If the supply
cord or mains plug is damaged, discontinue use immediately and have it
inspected and replaced by a qualified electrician in order to avoid a hazard.
Always unplug the appliance after use and before cleaning or changing
the filters or accessories.
WARNING! Read all safety warnings, instructions, illustrations
and specifications provided with this power tool.
Failure to follow all instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains operated
(corded) power tool or battery operated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark areas invite
accidents. Rags, cloths, cord, string and similar items should never be
left around the work area.
b. Do not operate power tools in explosive environments, such as in
the presence of flammable liquids, gases, or dust. Power tools create
sparks, which may ignite the dust or fumes.
c. Keep children and bystanders away while operating a power tool.
Distractions can cause the operator to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug
in any way. Do not use any adapter plugs with earthed (grounded)
power tools. Unmodified plugs and matching outlets will reduce risk of
electric shock.
b. Avoid body contact with grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is increased risk of electric
shock if your body is grounded.
c. Do not expose power tools to rain or wet conditions. Water entering
a power tool will increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges
or moving parts. Replace damaged cords immediately.
Damaged or entangled cords increase the risk of electric shock.
e. When operating a power tool outdoors, use an extension cord
suitable for outdoor use. Use of a cord suitable for outdoor reduces
the risk of electric shock.
f. If operating a power tool in a damp location is unavoidable, use
a residual current device (RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
NOTE: The term “residual current device (RCD) can be replaced by the
term “ground fault circuit interrupter (GFCI) or “earth leakage circuit
breaker (ELCB)”.
3. Personal safety
a. Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious personal
injury.
b. Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard
hat, or hearing protection will reduce personal injuries.
4
5
MODEL No.: MWW706S-35L-1200WC, PRODUCT No.: 61406
MODEL No.: MWW706S-35L-1200WC, PRODUCT No.: 61406
