2400W Wet & Dry Vacuum
AFTER SALES SUPPORT
e-mail: [email protected]
1800 909 909
MODEL No.:
MWW706S-35L-1200WC • 06/2018 • 61406
(toll free)
AFTER SALES SUPPORT
(toll free)
2400W Wet & Dry Vacuum
e-mail: [email protected]
1800 909 909
MODEL No.:
MWW706S-35L-1200WC • 06/2018 • 61406
26
27
Troubleshooting
Specifications
Troubleshooting
WARNING! You must pull out the power plug from the mains outlet before
commencing any cleaning, maintenance or inspection work procedures on
the appliance. Reconnect power to the machine when safe to do so.
Mains Voltage:
220-240V ~ 50/60Hz
Vacuum Rated Power:
1200W
Maximum Power Consumption of AC
Socket Outlet:
1200W
Maximum Total Power Consumption:
2400W
Tank Capacity:
35L +/- 2%
IP Rating:
IPX4
Weight (NW):
6.2kg
Product Dimensions:
67 x 34 x 34 cm
This product complies with the following standards:
Safety:
AS/NZS 60335.2.2 & AS/NZS 60335.1
EMC:
EA1+A2
Technical Specifications
Problem
Possible Cause
Possible Solution
Suction
decreases
Blocked flexible hose (17)
Gently remove obstruction using a long
stick
Blocked extension
suction tube (18)
Gently remove obstruction using a long
stick
Tank (10)
has reached 2/3
full or is completed full
with waste and debris
Completely empty tank (10)
Noise of
vacuum
changes
and suction
decreases
HEPA filter (16)
dirty and
clogged
Clean the HEPA filter (16) regularly by
carefully patting it and cleaning it with a
fine brush or hand brush (not supplied).
If suction continues to decreases after
cleaning the filter, replace with a new
HEPA filter.
Foam filter (19) is dirty and
clogged
Clean the foam filter (19) with a little soft
soap under running water. If suction
continues to decrease after cleaning
the filter, replace with a new foam filter.
Tank (10)
has reached 2/3
full or is completed full
with waste and debris
Completely empty tank (10)
Wrong filter has been
used
Use the correct filter for the application at
hand. Follow all warnings and instructions
provided in this user manual
Appliance
will not
operate
when the
power tool
is switched
on
Incorrect ON/OFF
switch (3) mode selected
Select the Automatic Mode “II” in the
ON/OFF switch (3)
Faulty power cord or
faulty mains outlet
Plug appliance into another mains outlet.
If it doesn’t work, the power cord must be
replaced by a certified electrician using
identical replacement parts
Appliance
does not
turn on
Faulty power cord or
faulty mains outlet
Plug appliance into another mains outlet.
If it doesn’t work, the power cord must be
replaced by a certified electrician using
identical replacement parts
