background image

2400W Wet & Dry Vacuum

AFTER SALES SUPPORT

e-mail: [email protected]

1800 909 909

MODEL No.: 

MWW706S-35L-1200WC  •  06/2018  •  61406

(toll free)

AFTER SALES SUPPORT

(toll free)

2400W Wet & Dry Vacuum

e-mail: [email protected]

1800 909 909

MODEL No.: 

MWW706S-35L-1200WC  •  06/2018  •  61406

24

25

1.  Foam Filter (61406-FF) 

2.  HEPA Filter (61404-HF)

3.  Dust Bag  

(61406-DB)

4.  Flexible Hose  

(61406-FH)

5.  Extension Tube Set 

(61406-ET)

6.  Floor Tool (61406-FT) 

7.  Crevice Tool (61406-CT)

Warranty

Warranty

Your new WORKZONE® TITANIUM Wet and Dry Vacuum will more than satisfy  

your expectations. It has been manufactured under stringent WORKZONE® 

TITANIUM.  Quality Standards to meet superior performance criteria.
You will find your new Wet and Dry Vacuum easy and safe to operate, and, 

with proper care, it will give you many years of dependable service.
CAUTION. Carefully read through this entire instruction manual before using 

your new WORKZONE® TITANIUM Wet and Dry Vacuum.
Take special care to heed the Cautions and Warnings.
Your WORKZONE® TITANIUM Wet and Dry Vacuum has many features that will 

make your job faster and easier. Safety, performance, and dependability have 

been given top priority in the development of this WORKZONE® TITANIUM 

Wet and Dry Vacuum, making it easy to maintain and operate.
Use only WORKZONE® TITANIUM replacement parts for your product.  

Non-conforming parts or modifications made to parts will void your 

warranty.

Environmental protection

Recycle unwanted materials instead of disposing of them as waste.
All tools, hoses and packaging should be sorted, taken to the local  

recycling centre and disposed of in an environmentally safe way.

What your 3 year warranty means

Great care has gone into the manufacture of this product and it should 

therefore provide you with years of good service when used properly.
In the event of product failure within its intended use over the course of 

the first 3 years after the date of purchase, we will remedy the problem as 

quickly as possible once it has been brought to our attention. In the unlikely 

event of such an occurrence, or if you require any information about the 

product please contact us via our after sales support services, details of 

which can be found in this manual and on the product itself. After Sales 

Support TEL: 1800 909 909 or email: [email protected]

Accessories and After Sales parts

Should you find the following accessories are worn or past their user life, 

replacements can be purchased online via our website https://help.tools/

If you have any queries regarding  

these accessories, please call us on our  

Customer Support Line: 1800 909 909.

Warranty

Содержание 61406

















Отзывы: