AFTER SALES SUPPORT
21
1300 855 831
MODEL: DP17L PRODUCT CODE: 53664 08/2018
AUS
DP17L
Operating instructions
6 - 7
7 - 8
1200
7 - 8
8 - 9
1000
8 - 9
9 - 10
800
9 - 10
10 - 11
650
> 10
>11
500
Slide the motor unit (15) back to tension the V-belts (27) again.
6. The V-belts (27) are correctly tensioned when it gives way slightly when
pressed.
7. Tighten the clamping screw (17)
with the allen key 6 mm (25) on the motor unit
(15) again.
8. Close the gear cover (16). Fasten the locking screw for gear cover (18) on the
gear cover (16) with the allen key 5 mm (24)
.
The gear cover (16) is equipped with a interlock switch. If the gear cover (16) is not
closed correctly, the device cannot be switched on.
Checking the V-belts (Fig. 1 / 11 / 12)
1. Release the locking screw for gear cover (18) on the gear cover (16) with the
allen key 5 mm (24).
2. Open the gear cover (16).
3. Check the tension of the V-belts (27).
4. The V-belt (27) are correctly tensioned when it gives way slightly when pressed.
5. Check the V-belts (27) for tears, cuts or other damage.
6. Close the gear cover (16). Fasten the locking screw for gear cover (18) on the
gear cover (16) with the allen key 5 mm (25).
Tensioning the V-belts (Fig. 1 / 11 / 12)
1. Release the locking screw on the gear cover (16).
2. Open the gear cover (16).
3. Release the clamping screw (17)
on the motor unit (15) with the allen key 6 mm
(25).
4. Slide the motor unit (15) back to tension the V-belts (27).
5. The V-belts (27) are correctly tensioned when it gives way lightly when pressed.
6. Tighten the clamping screw (17) on the motor unit (15) again.
7. Close the gear cover (16). Fasten the locking screw for gear cover (18)
on the
gear cover (16) with the allen key 5 mm (24).
