18
AFTER SALES SUPPORT
1300 855 831
MODEL: DP17L PRODUCT CODE: 53664 08/2018
Hazards generated by neglecting ergonomic principles in machinery design
related to:
• Unhealthy postures or excessive effort.
• Hand-arm or foot-leg anatomy.
• Local lighting.
• Mental overload and underload, stress.
• Human error, human behaviour.
•
Design, location or identification of manual controls.
Combination of hazards
Unexpected start up, unexpected overrun/overspeed (or any similar malfunc-
tion) from:
• Failure/disorder of the control system.
•
External influences on electrical equipment.
• Errors made by the operator (due to mismatch of machinery with human
characteristics and abilities).
• Impossibility of stopping the machine in the best possible conditions.
• Variations in the rotational speed of tools.
• Failure of the power supply.
• Failure of the control circuit.
•
Errors of fitting.
• Break-up during operation.
•
Falling or ejected objects or fluids.
• Loss of stability / overturning of machinery.
VI. BEFORE STARTING THE EQUIPMENT
•
Prepare the workplace where the machine is to be placed. Ensure sufficient room
to allow safe work without malfunctions. The machine is designed to operate in
closed rooms and must be placed stably on firm level ground. The machine is
designed to be fixed to a workbench or table via two screws (not included) through
the baseplate. (e.g. workbench or table).
•
All covers and safety devices have to be properly fitted before the equipment is
switched on.
• It must be possible for the drill chuck to run freely.
• When working with wood that has been processed before, watch out for foreign
bodies such as nails or screws, etc.
•
Before you press the ON/OFF switch check that the chuck and drill bit is fitted
correctly. Moving parts must run smoothly.
• Before you connect the equipment to the power supply make sure the data on the
rating plate are identical to the mains data.
AUS
Safety regulations/Before starting the equipment
DP17L
