20
AFTER SALES SUPPORT
1300 855 831
MODEL: DP17L PRODUCT CODE: 53664 08/2018
AUS
Operating instructions
DP17L
VIII. OPERATING INSTRUCTIONS
Caution! Risk of injury!
•
Ensure that you have sufficient space in which to work and that you do not
endanger other people.
•
All hoods and protective devices must be assembled properly before commis-
sioning.
•
Disconnect the mains plug before changing the setting on the device.
Setting up
Place the drill press on a solid surface. Ideally, screw the drill press to the surface.
Use the two holes in the baseplate (11) for this.
Selecting the speed (Fig. 1 / 11 / 12)
1. Release the locking screw for gear cover (18) on the gear cover (16) with the
allen key 5 mm (24).
2. Open the gear cover (16).
3. Release the clamping screw (17) with the allen key 6 mm (25)
on the motor unit
(15).
4. Slide the motor unit (15) forward a little to release the load on the V-belts (27).
5.
Place the two V-belts (27) on the desired assembly to reach the specified
speed.
This drill press offers nine different speeds. The speeds can be adjusted by ch-
anging the position of the two V-belts. The V-belts are tensioned between three
pulleys, the pulley in the middle is movable.
Recommended speeds for different drill sizes and materials:
Drill Bit Size mm
Speed RPM
Pulley
and Belt
Placement
< 3
< 4
2500
3 - 4
4 - 5
2000
4 - 5
5 - 6
1850
5 - 6
6 - 7
1400
