Workzone 53664 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 26

Workzone 53664 Скачать руководство пользователя страница 12

AFTER SALES SUPPORT

17



1300 855 831



support@scheppach.com.au

MODEL: DP17L PRODUCT CODE: 53664 08/2018

AUS

DP17L

Safety regulations

objects. Do not mix unpacked batteries or toss them together! This can lead

to a short-circuit of the battery and thus damage, burns or even the risk of fire.

16

Remove batteries from the equipment when it will not be used for an extended

period of time, unless it is for emergencies!

17

NEVER handle batteries that have leaked without appropriate protection. If

the leaked fluid comes into contact with your skin, the skin in this area should

be rinsed off under running water immediately. Always prevent the fluid from

coming into contact with the eyes and mouth. In the event of contact, please

seek immediate medical attention.

18

Clean the battery contacts and corresponding contacts in the device prior to

inserting the batteries:

Residual risks

The machine has been built according to the state of the art and the

recognised technical safety requirements. However, individual residual

risks can arise during operation.

Mechanical hazards related to:

machine parts or workpieces:

• Shape.

• Relative location.

• Mass and velocity (kinetic energy of elements in controlled or uncontrolled mo-

tion).

• Mechanical strength.

• Crushing hazard.

• Cutting or severing hazard.

• Entanglement hazard.

• Drawing-in or trapping hazard.

Electrical hazards due to:

• Contact of persons with live parts (direct contact).

• Contact of persons with parts which have become live under faulty conditions

(indirect contact).

• Electrostatic phenomena.

Hazards generated by noise, resulting in:

• Hearing loss (deafness), other physiological disorders (loss of balance, loss of

awareness).

• Interference with speech communication, acoustic signals.

Hazards generated by materials and substances

(and their constituent elements)

processed or used by the machinery.

•

Hazards from contact with or inhalation of harmful fluids and dusts.

• Fire hazard.

«
...
10
11
12
13
14
...
»

Содержание 53664



























Отзывы:

Нет отзывов