Workzone 53664, Руководство пользователя

Страница: 14 / 26

AFTER SALES SUPPORT
19

1300 855 831

support@scheppach.com.au
MODEL: DP17L PRODUCT CODE: 53664 08/2018
AUS
DP17L Assembly
VII. ASSEMBLY
Assembly tools
1 allen key SW 4
1 open end wrench SW 6 / 13 /19 (not scope of delivery)
1 screwdriver (not scope of delivery)
1. The drill press is supplied disassembled. Clean the column tube (8), baseplate
(11), drilling bench (9) and the drill chuck (7) beforehand, with a dry cloth.
2. Place the column tube (8) on the baseplate (11). Bolt the column tube (8) to the
baseplate (11) with the three assembly screws (12) supplied. Tighten the assem-
bly screws (12) moderately tight with an open end wrench SW 13 (not scope of
delivery) so that the threads in the baseplate (11) do not strip. (Fig. 3)
3. Screw the drilling bench (9) and the drilling bench holder (14) together with the
retaining screw for drilling bench (10). Tighten retaining screw for drilling bench
(10) with an open end wrench SW 19 (not scope of delivery). (Fig. 4)
4. Place the drilling bench holder (14) on the column tube (8). Push the drilling
bench holder (14) into a lower position. Fix the drilling bench holder (14) with the
locking handle (13) in the required position. (Fig. 5)
5. Place the machine head on the column tube (8) and secure the machine head
with the two grub screws (19) to the side with the allen key, 4 mm (23).
(Fig. 6)
6. Put the drill chuck guard (5) on the upper part of the drill spindle. Secure the drill
chuck guard (5) with a screwdriver. (Fig. 7)
7. Fold the drill chuck guard (5) upwards. Insert the drill chuck (7) on the taper of
the drill spindle (6). Push the drill chuck onto the drill chuck tip with a few light
taps. Use a plastic hammer for this purpose. (Fig. 1 / 8)
8. Insert the depth stop with scale (4) through the hole in the fence. Screw the
depth stop with scale (4) with the drill chuck guard (5). Centrally align the depth
stop with scale (4) into the bore of the fence. (Fig. 9)
9. Bolt the three drill lifting arms (21) into the hand spindle guide (20). Tighten the
three hole lifting arms with an open end wrench (SW 6). (Fig. 10)
10. Open the cover of the battery compartment (3). Insert the two batteries (30).
Close the cover of the battery compartment (3). (Fig.1 / 2)