Worcester Greenstar 36LXi, Инструкция пользователя

Страница: 19 / 42

LEMCOM EtherNet/IP™ - User manual EtherNet/IP™
COVAL - LMEIP-UK-D-1155UM0067 19/42
ETHERNET/IP™
8.1 General
EtherNet/IP stands for Ethernet Industrial Protocol and defines an open industry standard that
extends the classic Ethernet with an industrial protocol.
8.2 RSLogix 5000 configuration
Make sure you followed the “
Network configuration
” steps before trying to connect to LEMCOM
using a PLC and RSLogix 5000 software.
Installing the Electronic Data Sheet Files (EDS)
Installing an EDS file allows the Ethernet/IP Module to be identified by Rockwell’s RSLinx software.

DOWNLOAD LEMCOM EDS FILE FROM COVAL WEBSITE

The installation procedure is straightforward.
1.
From the computer’s desktop, click Start > Programs > Rockwell Software > RSLinx Tools >
EDS Hardware Installation Tool. This will execute the EDS Hardware Installation Tool
software.
2. From the Rockwell Software - Hardware Installation Tool dialog box, click Add.
3.
From the Rockwell Software’s EDS Wizard, click Register a single EDS file.
4. Select LEMCOM
’s EDS file (available in the download area of
LEMCOM webpage ).
5. Click Next.
6. The software will run the files through a test that evaluates the EDS files for errors.
7.
The test results should display a “green check mark” to the left of the EDS file.
8. Click Next.
9. The installation tool may ask if you want to Change Graphic Image. The icon provided in the
zip file will be automatically used.
10. Click Next.
11. This will bring up the Final Task Summary.
12. Click Next.
13. Once the "Please wait as the EDS wizard installs the new files..." message goes away, you
have successfully completed the registration of the EDS files.
14. Click Finish.
Close the Rockwell Software - Hardware Installation Tool dialog box by clicking Exit.