Worcester Greenstar 36LXi, Инструкция пользователя

Страница: 17 / 42

LEMCOM EtherNet/IP™ - User manual
Network configuration
COVAL - LMEIP-UK-D-1155UM0067 17/42
6. Set new IP address and other network parameters
7. M
aster module restarts when “OK” button is pressed then LEMCOM Manager automatically
tries to reconnect to the LEMCOM (however, reconnection would fail if computer and
LEMCOM are not on the same network anymore).
The LEMCOM can now be connected to the factory or machine network.
6.2.2 Using LEMCOM webserver
Not implemented yet.
6.3 Reset LEMCOM ’s IP address
LEMCOM
’s IP address can be set back to its default value (10.3.182.163):
1. Unplug LEMCOM from the 24V DC power supply.
2. Press and hold the
‘SET’ button
on the front panel of master LEMCOM.
3. Plug back in the power supply.
4. Release the button when
MS led starts to blink.
IP address is now 10.3.182.163.
6.4 LEMCOM MAC address
Any LEMCOM master module can be identified on the ethernet network by its unique hardware
address, the MAC address.
The Coval OUI (Organizationally Unique Identifier) is 20:5A:00 so all LEMCOM MAC addresses
follow the format 20:5A:00:xx:xx:xx (where xx:xx:xx is an incremental and unique value).
The MAC address is written on the left side of the LEMCOM master module and can also be read
using LEMCOM Manager.
SET
button
MS
led