Worcester Greenstar 36LXi, Инструкция пользователя

Страница: 11 / 42

LEMCOM EtherNet/IP™ - User manual
Wiring instructions
COVAL - LMEIP-UK-D-1155UM0067 11/42
3.2 Coval Bus connector
Figure 4
– Wiring instructions (M8 – Coval bus connector)
Connection between LEMCOM modules is done with a M8 / M8 cable (female-
female) or, if assembled as an island, with a specific M8 / M8 bridge.
The maximum overall length for COVAL Bus is 20 meters.
3.3 Ethernet ports
The master EtherNet/IP LEMCOM embeds a fast Ethernet 2-port switch. Field bus can be connected
to one of the two ports and the other is available to connect another EtherNet/IP capable device in
series (either another LEMCOM or a motor, encoder, etc.).
Figure 6 - Wiring instructions (M8
– Ethernet connector)
The same wiring standard as EtherCAT has been chosen to allow installers to get M8 / RJ45 cables
from connectors and cables suppliers such as Phoenix Contact, Beckhoff, Weidmüller, Igus, etc.
M8/RJ45 ETHERNET CABLE
– Shielded – CAT 5
The following Coval references (M8 4-pin straight IP67 /
RJ45 4-pin straight IP20) can be used:
CDM8RJ45L2 2 meters
CDM8RJ45L5 5 meters
(0.2 to 40.0m length available upon request)
SHIELDED CABLES
It is highly recommended to use shielded CAT-5 cable (with STP, Shielded Twisted
Pair) to connect the master pump to the network.
M8
1 (BR)
2 (WH)
3 (BU)
4 (BK)
M8
1
2
3
4
24 V DC
CAN_H
CAN_GND
CAN_L
M8
1
2
3
4
RJ45
1 (YE)
3 (WH)
6 (BU)
2 (OG)
TX+
RX+
RX-
TX-
Figure 5 - Coval
Bus bridge
connector