30 |
U M - P S - E N - 0 0
TV
SiliconDust IP:
The IP address of the
SiliconDust tuner.
SiliconDust Channels:
Press
Refresh
to
update the channel list from the SiliconDust
tuner. Press
Add All
to add all channels from
the SiliconDust channel list.
USB Tuner Channels:
Press
Rescan
to
update the channel list from the USB tuner.
Press
Add All
to add all channels from the
USB tuner channel list.
Active Channels:
Shows the number of
active channels. Press
Reset
to remove all
active channels from available channels.
Delivery System:
Press
ATSC
,
DVBT
, or
DVBT2
to change the TV delivery system.
Used for USB Tuner.
Modulation:
Press
VSB
,
QAM
, or
QPSK
to
change the TV modulation method. Used for
USB Tuner.
Scan Signal Minimum %:
USB Tuner
channels with this signal strength or above
will be detected.
Channel:
Press
Add
to individually
remove/add a channel using either
SiliconDust, USB, or IPTV.
For more information on adding channels
see Section 10 on page 65.
