FORM: PPS SERIES OWNERS MNUL
REV: 05-31-2012
APPR BY: MF
32
Speed Display:
The top three-digit display indicates the current speed of the treadmill. The displayed
speed in miles per hour is set with a key to the right of the display. The two LEDs
between the display and key indicate which of the two units is currently activated. The
sign in front of the displayed value can be used to indicate a backward running belt in
the event that the treadmill offers such a facility.
Distance and Burnt Calories Display:
The display alternates in 10-second cycles between the distance in miles since the
treadmill was last switched on, and the calories burnt by the runner. The upper LED is
assigned to the distance value, the lower one to the calories burnt.
The values for distance and calories are retained after the treadmill is stopped. They are
deleted following renewed start of the treadmill via the hand-rail keypad or the remote
control.
Exercise Time Display:
The exercise duration is reset to zero each time the treadmill is restarted. The display
includes minutes and seconds that have elapsed since the treadmill was started. The
two values are separated by two dots which flash to indicate seconds.
The display changes over to hours and minutes when the training duration exceeds one
hour. The top LED is then turned off and the bottom starts to flash in its place to indicate
the new status.
Incline and Pulse Rate Display:
These two values are also indicated by the same display. The incline, just as the speed
value, is preceded by a sign. However, a negative sign can only be indicated if the
treadmill features such a facility. The incline direction can only be changed via PC with
a remote control or with the hand-rail keypad.
After a change of incline, the new value is indicated for 5 seconds on the display. The
upper of the two LEDs alongside the display is active for this purpose. The current pulse
rate of the runner is displayed after this 5-second period if the incline remains
unchanged; this status is indicated by the bottom LED.
Unless incline is being changed, the display will only return to the incline value when the
radio link to the pulse sensor on the body of the runner is interrupted. The monitor will
display the incline value if the treadmill does not feature a pulse sensor.
Содержание PPS 43
Страница 26: ...FORM PPS SERIES OWNERS MNUL REV 05 31 2012 APPR BY MF 26 PPS Med 43 PPS Med 55 PPS Med 70...
Страница 28: ...FORM PPS SERIES OWNERS MNUL REV 05 31 2012 APPR BY MF 28 PPS Bari Mill 43 PPS Bari Mill 55 PPS Bari Mill 70...
Страница 48: ...FORM PPS SERIES OWNERS MNUL REV 05 31 2012 APPR BY MF 48 WARRANTY INFORMATION Chapter 6...
Страница 55: ...FORM PPS SERIES OWNERS MNUL REV 05 31 2012 APPR BY MF 55 966 3929 800 WOODWAY...