Woodway PPS 43, Руководство пользователя

Страница: 22 / 55

FORM: PPS SERIES OWNERS MNUL
REV: 05-31-2012
APPR BY: MF
22
Erection Site
In most cases, your WOODWAY treadmill will be delivered completely assembled.
Check immediately upon delivery for any signs of transport damage. Please report all
damage immediately to the transport company and to the factory.
The treadmill must be installed on a flat, sufficiently firm floor surface. When installed on
higher stories, ensure that the system is positioned as far as possible in the corner of
the rooms to ensure sufficient stability even when running at higher speeds. The
erection site must be as flat as possible to ensure minimum deflection of the frame.
The treadmill may not be erected directly on carpet with relatively long pile because of
the moving parts on the underside of the treadmill. If necessary, a suitable mat should
be placed under the treadmill. This prevents carpet from being caught up in the
treadmill, and also reduces wear on the carpet surface.
Transport/Storage and Disposal
DELIVERY:

The treadmill is heavy and can cause injury if lifted incorrectly.

Always use the supplied carrier poles if the treadmill is to be moved.

Never use the covers to lift or pull the treadmill. If a flat trolley is available, slide
the trolley under the treadmill and then move the treadmill to its new position.

If the treadmill has to be dismantled, the covers and railings can be taken down
for easier transport.

Do only store in closed or roofed over rooms.
DISPOSAL:
Note: The disposal has to be proceeded according to the national regulations each.
Refer to appropriate disposal enterprises.

The treadmill packing is to be supplied to recycling services.

The metallic parts of the treadmill are to be supplied to disposal of old-metal.

Plastic parts are to be supplied to recycling services.

Electric components and circuit boards are to be disposed as electronic scrap.

Rubber parts are to be disposed as special refuse.