FORM: PPS SERIES OWNERS MNUL
REV: 05-31-2012
APPR BY: MF
47
End Switches
Removal:
1. Remove the right-hand side covering.
2. Disconnect the cable from the old end switch unit and install a new end switch
unit.
3. Remove the end switch and bracket.
Replacement:
Install the new end switch unit and then replace the side covering panels.
Incline Motor
Required tools:
10 mm socket wrench element or wrench
Removal:
1. Remove the side panels.
2. Loosen the motor cable and disconnect from the control unit.
3. Unscrew the four attachment screws of the incline motor and remove the motor.
4. Remove the motor screws and pull the motor out of the frame.
Replacement:
In reverse order of removal. (The screws of the incline motor are tightened to 12.3 foot
pounds)
Содержание PPS 43
Страница 26: ...FORM PPS SERIES OWNERS MNUL REV 05 31 2012 APPR BY MF 26 PPS Med 43 PPS Med 55 PPS Med 70...
Страница 28: ...FORM PPS SERIES OWNERS MNUL REV 05 31 2012 APPR BY MF 28 PPS Bari Mill 43 PPS Bari Mill 55 PPS Bari Mill 70...
Страница 48: ...FORM PPS SERIES OWNERS MNUL REV 05 31 2012 APPR BY MF 48 WARRANTY INFORMATION Chapter 6...
Страница 55: ...FORM PPS SERIES OWNERS MNUL REV 05 31 2012 APPR BY MF 55 966 3929 800 WOODWAY...
