Woodway PPS 43, Руководство пользователя

Страница: 45 / 55

FORM: PPS SERIES OWNERS MNUL
REV: 05-31-2012
APPR BY: MF
45
Handrail
Removal:
1. Disconnect the treadmill from the mains and remove the outer covers.
2. Disconnect the cable coming out of the handrail.
3. Remove the two attachment screws at each side of the treadmill. Pull the
handrail out, ensuring that the cable harness (es) are not crushed or cut through.
Replacement: In reverse order of removal.
Running Mat
Repairs to the running mat system (running mat/deflection rollers) should only be carried
out by the WOODWAY customer service or following consultation with the factory.
Individual Slats
Required tools: T20
TORX element: 10” extension and/or electric screwdriver
Removal:
1. Disconnect from the mains and remove the side covering. Turn the mat until the
defect slat is at the front underneath the appliance. (The screws are most easily
accessible in this position).
2. Remove the two screws and plates on either side. Then take the defect slat
crosswise off the belt.
WARNING: WHEN REPLACING THE SLAT; IT IS VITAL THAT NEW PARTS ARE
USED. IF THE OLD SCREWS ARE USED AGAIN THE NEW SLAT COULD COME
LOOSE FROM THE MAT SURFACE AND CAUSE SEVERE INJURIES.
AVERTISSEMENT:
Lorsque vous remplacez la lame; Il est vital que les parties
nouvelles sont utilisées. Si les vis OLD sont utilisés de nouveau la lame peut se
détacher NOUVEAU DE LA SURFACE ET MAT causer des blessures graves.
Replacement:
1. Place the new slat crosswise on the mat. Screw in two new screws on either
side. NOTE: All four (4) screws must be positioned in the slat before tightening
the individual screws .
2. Then mount the covers back in position.