Woodway PPS 43, Руководство пользователя

Страница: 33 / 55

FORM: PPS SERIES OWNERS MNUL
REV: 05-31-2012
APPR BY: MF
33
Treadmill Control Mode Display:
The control mode is displayed by five LEDs on the right-hand side of the monitor.
The significance of the LEDs (from top to bottom) is as follows:

Manual control via the hand-rail keypad is active.

The treadmill is in stop mode (it is only possible to change the running direction
and start the running or pulse programs via a PC in this mode).

Remote control (running/pulse program) started from a PC or other accessory
unit.

Change of running direction is possible.

Backward running direction is active (the belt runs backwards when it is started
with the plus key on the hand-rail; a negative speed is displayed.
Control Unit of the Data Monitor:
The data monitor features three keys and one EMERGENCY STOP switch.
As previously described, the first key changes the unit of speed.
The second key (underneath) changes the running direction of the belt. The treadmill
will only react to the depression of this key if the LED indicates that the changeover
facility is active (fourth mode display LED from the top). A change of running direction is
indicated by the running direction LED (fifth from the top).
The button underneath these two keys stops the treadmill during an exercise session.
The speed is slowly reduced until the belt comes to stop. The incline adjusted before
the key was actuated is retained. Once the belt has stopped the treadmill is changed
over to stop mode (indicated by the second mode LED from the top).
The red emergency stop button at the bottom right-hand side of the data monitor by-
passes the electronic control and instantly stops the treadmill in an emergency.
WARNING: Instant stop is with a jerk, as opposed to a slowed down stop.
AVERTISSEMENT : arrêt instantané est d'un coup, par opposition à un arrêt de
ralenti.
Note: After an emergency stop the treadmill must be switched on again for a renewed
start.