Woodstock ShopFox W1763W, Руководство пользователя, Страница: 28 / 64

-26-
Model W1763W (For Machines Mfd. Since 09/16)
O
PE
R
ATIO
NS
Belt.Speed.Adjustment
Spindle speed on the W1763W is controlled by the position
of the V-belt on the pulleys, as shown in
Figure.28
. The
two spindle speeds are 7,000 and 10,000 RPM. A faster
speed is typically used with router bits, and a slower
speed is typically used with shaper cutters.
Tool Needed: Qty
Wrench or Socket
5
⁄
8
" .........................................1
To.change.belt.speeds,.do.these.steps:
1.
DISCONNECT MACHINE FROM POWER!
2.
Loosen two motor mount hex bolts (see
Figure.29
)
ONLY one full turn, and slide motor right to loosen
belt.
Note: Pinching the center of the belt together,
while pushing motor to the right, easily shifts motor
in motor mount.
3.
Move belt to pulley position that will yield desired
speed (see Figure 28 ).
4. Slide motor left with one hand to tension belt, and
use the other hand to tighten motor mount hex bolts
until proper deflection is achieved (see Figure 30 ).
10,000
7,000
Motor Pulley
Spindle Pulley
RPM
Figure.28.
Pulley speed positions.
Figure 30 . Proper belt deflection for
W1763W.
Pulley
Deflection
Pulley
1
⁄
4
"
Figure.29.. Adjusting belt tension.
Motor Mount
Hex Bolts