Woodstock ShopFox W1763W, Руководство пользователя, Страница: 16 / 64

-14-
Model W1763W (For Machines Mfd. Since 09/16)
SE
TU
P
Figure.7.
Shaper cabinet and extension
wing.
Component.Inventory.(Figures.7–9). Qty
A.
Machine Body ..............................................1
B. Extension Wing .............................................1
C.
Fence Carriage and Guard Support Bars ...............1
D. Caster Assembly ...........................................1
E.
Carriage Lock Knobs.......................................2
F. Drawbar .....................................................1
G.
Multi-Function Spindle Wrench ..........................1
H. Handwheel Handle ........................................1
I.
Miter Gauge ................................................1
J. Router Bit Collet
1
⁄
4
" ......................................1
K.
Router Bit Collet
1
⁄
2
" ......................................1
L. Router Bit Collet Nut .....................................1
M. Open-End Wrench 14/17mm .............................1
N. Spindle
3
⁄
4
" with Spacers .................................1
O.
Spindle
1
⁄
2
" with Spacers .................................1
P. Table Insert 1
3
⁄
4
"...........................................1
Q.
Table Insert 1
3
⁄
8
"...........................................1
R. Hex Wrench 3, 4, 5, 6, 8mm .......................1 Ea.
S. Starting Pins ................................................2
Hardware.(see."Hardware.Recognition.Chart")
• Cap Screws M10-1.5 x 35 (Extension Table) ...........3
• Flat Washers 10mm (Extension Table) .................3
• Lock Washers 10mm (Extension Table) .................3
• Flat Washers 12mm (Carriage Assembly) ..............2
• Cap Screws M8-1.25 x 50 (Caster Assembly) ..........3
• Flat Washers 8mm (Caster Assembly) ..................3
• Hex Nuts M8-1.25 (Caster Assembly) ...................3
Inventory
B
Figure.8.
Included inventory items.
C
D
E
Figure.9.. Component inventory.
H
I
J
K
L
M
N
F
G
The following is a list of items shipped with your machine.
Before beginning setup, lay these items out and inventory
them.
Note: If you cannot find an item on this list, carefully
check around/inside the machine and packaging materials.
Often, these items get lost in packaging materials while
unpacking or they are pre-installed at the factory.
A
O
P
Q
R
S