woodmizer LT70M AH Super, Руководство пользователя

Страница: 43 / 142

Setup & Operation
Portable Sawmill Setup
Setup & Operation HDSdoc021716 2-9
2
2.3 Portable Sawmill Setup
WARNING! Do not set up the mill on ground with more than a 10 degree
incline. If setup on an incline is necessary, put blocks under one side of the
mill or dig out areas for outrigger legs to keep mill level. Setting up the mill on
an incline could cause it to tip over, resulting in serious personal injury.
WARNING! Chock the trailer wheels to prevent movement before unhitching it
from the towing vehicle. Failure to do so will result in serious injury or death.
WARNING! Always make sure the trailer is supporting the sawmill frame
when operating a sawmill with adjustable outriggers. Failure to do so will
result in serious injury or death. The adjustable outriggers are intended to
support the saw frame with assistance from the trailer.
1. Unhitch the mill from the vehicle.
2. Lower and set the front outriggers. To lower the leg, first place a 19 socket wrench on the outrigger
adjustment bolt and turn the bolt until the outrigger movable part reaches its highest position. Next pull the
locking pin out of the outrigger hole. When the outrigger contacts the ground, release the pin. Then place a
19 socket wrench on the outrigger adjustment bolt and turn the bolt until the locking pin enters the nearest
outrigger hole.
WARNING! Put front outrigger down before moving cutting head from the rest
position. Failure to do so may result in serious injury.