woodmizer LT70M AH Super, Руководство пользователя

Страница: 37 / 142

Setup & Operation
Stationary Sawmill Setup
Setup & Operation HDSdoc021716 2-3
2
sons at a safe distance. Failure to do so may result in serious injury or death.
2.2 Stationary Sawmill Setup
Set up the mill on firm footing and level by eye. Fasten the mill to the floor to prevent any creep after
prolonged use. Overall Dimensions- See Tabela 1-8 na stronie 14.
1. Unlock the hydraulic control box by pulling out the locking pin from the control box lock bracket. Remove the
control box lock bracket from the saw head track rails.
2. Unhook the carriage safety chain, located at the bottom of the vertical mast.
3. Turn the key switch on the control panel to the accessory position. Use the up/down switch on the control
panel to raise the cutting head from the carriage rest pin. Remove the locking pin and swing the rest pin
down below bed level.
4. Use the carriage fwd/rev switch (left side of control box) to move the cutting head toward the front end of the
mill. The hydraulic control levers become operational when the contacts at the bottom of the carriage touch
sm0383