Woodbridge DVI 750 (N, Инструкция по установке и эксплуатации

Страница: 8 / 40

8
48D0139
9
GENERAL INSTALLATION INFORMATION
Uniform Mechanical Code (current edition), and Local Building Codes for specific installation requirements.
INSERT APPLICATIONS
Before installing the gas fireplace insert, consider the functioning needs of the fireplace. Confirm the size of the fireplace
cavity, the design of the chimney, and the availablility of the gas supply and electricity for the insert fan.
IMPORTANT: Your direct vent insert is designed to be only vented vertically with a minimum height of
10 feet.
The following factors should be taken into consideration:
• This insert should have sufficient access for its safe operation and maintenance.
• The flow of combustion and ventilation air must not be obstructed.
•
Minimum clearances to combustibles, such as mantels, must be maintained.
• Never obstruct the front opening of the insert.
• Do
not install in the vicinity where gasoline or other flammable liquids may be stored.
• These units can be installed in a bedroom. See National Fuel Gas Code ANSI Z233.1/NFPA 54 (current edition), the
MINIMUM FIREPLACE SIZE/CLEARANCES TO COMBUSTIBLES
When the unit is installed into a woodburning freplace, the minimum distance the mantel can be placed above the
freplace is governed by local building codes applicable to woodburning freplaces. Consult local authorities having
jurisdiction for these clearances. The underside of the mantel will become warm. Use only fnishes which are heat
resistant and do not discolor.
IMPORTANT: Your direct vent insert was designed to be installed in an existing wood burning fireplace.
The location and clearances are subject to local building codes and the requirements of
the gas supplier
and NFPA 211
.