Woodbridge DVI 750 (N, Инструкция по установке и эксплуатации

Страница: 27 / 40

26
48D0139
2
7
Smart Thermostat
The Smart Thermostat function adjusts the flame height
in accordance to the difference between the set point
temperature and the actual room temperature. As the
room
temperature gets closer to the set point, the Smart
Function
will
modulate the flame down.
1. To activate this function, press the Thermostat key
until the word
"SMART"
appears to the
right
of the
temperature bulb on
the
LCD screen (see Figure
).
2. To adjust the set temperature, press the up or
down-arrow keys until the desired set temperature
is displayed on the LCD screen.
Figure - Remot
e
Control Displaying Smart
Thermostat Function
Key Lock
This function will lock the keys to avoid unsupervised
operation.
keys at the same time. A lock icon
will
appear on the
LCD screen (sec Figure
).
2.
To deactivate this function, press the
MODE
and
UP
keys at the same time. The lock icon
will
disappear
from the LCD screen.
Low Battery Power Detection
Receiver
The life span of the receiver batteries depends upon
various factors: battery quality, Humber of appliance ig-
nitions, number of
thermostat
set point changes, etc.
'Vhen the receiver batteries are low, no "beep" will
sound from the receiver when a transmitter command
is sent. Replace batteries when this happens,
Transmitter
The life span of the transmitter batteries depends upon
various factors: battery quality, number of appliance ig-
nitions, number of thermostat set point changes, etc.
When the transmitter batteries arc low, an icon will
appeal' on the LCD display (see
Figure
4a
),
Replace
batteries when this icon appears.
Figure
4a
- Remote Control Displaying Low Battery
Manual Override
If the
receiver
or
transmitter
batteries are low or
de-
pleted, the appliance can still be turned on manually.
1. Move the
receivers
three-position slider to the ON
position. This
will
bypass the remote control
feature
of the system
and
the appliance
main
burner will
turn on.
Command Definitions
Pilot IPI / CPI
switch
Position of the
receiver slider switch
Command reference
name
Commanded Fireplace
State
Opened, IPI
“OFF”
“REMOTE”
and “OFF received”
Turn-OFF Flames OFF
Opened, IPI
“ON”
“REMOTE”
and “ON received”
Turn-ON
Pilot + Main burner
flames ON
Closed, CPI
“OFF”
“REMOTE”
and “OFF received”
Pilot-ON Pilot flame ON
Closed, CPI
“ON”
“REMOTE”
and “ON received”
Turn-ON
Pilot + Main burner
flames ON
Figure
-
Remot
e
Control Displaying Key Lock Mode
OPERATING INSTRUCTIONS
T
(Transmitter Operation" Proflame GTM )
1.
To activate this function, press the
MODE and U
P