Woodbridge DVI 750 (N, Инструкция по установке и эксплуатации

Страница: 26 / 40

2 6
48D0139
29
OPERATING INSTRUCTIONS
T
Turning ON the Appliance
1.
Press the ON/OFF button on the transmitter. The
transmitter screen will display all active icons. The
receiver will command the DFC board to start the
ignition process, Once the pilot flame is
lit,
the DFC
These units have six flame levels (see Figure
3 1
).
1.
With the system ON and the flame level at maximum
height, press the down-arrow
key once to reduce the
flame height by one step. Continue pressing down-
arrow key until flame is turned OFF.
2. Press the up-arrow key to increase the flame
hcight.
Flame Levell
Flame Level 5 Flame Level Max.
Figure
3 1b
-
Remote Control Displaying Split Flow Mode
Room Thermostat
(Transmitter Operation)
The remote control
can
operate as a room thermostat.
The thermostat can be set to a desired temperature to
control the comfort level in the room.
1.
To activate this function, press the Thermostat key.
The LCD display on the transmitter
will
change to
show that the room thermostat is ON and the set
temperature is now displayed (see Figure
3 2
).
2. Adjust the set temperature by pressing the up or
down-arrow keys until the desired set temperature
is displayed on the LCD screen (see Figure
3 2
).
Room
Temperature
Set
Temperature
Figure
3
0
-
Remote Control Display in Faren
h
eit and
Celsius
bo
ard
will
open the main valve outlet and the main
burner will ignite. A single "beep"
from
the receiver
will confirm the command.
Turning OFF the Appliance
1.
Press the ON/OF
F
button
011
the transmitter, The
A single "beep" from the receiver will confirm the
command.
transmitter LC
D
display will only show the room
temperature and icon (see Figure
3 0b
). The receiver
disconnects and
will
command the DFC board to
turn o
ff the burner
.
Figure
3 0b -
Remote Control Displaying Room
Temperature
Proflame GTM
the receiver
will
confirm the command.
Note:
If y
ou press the up-arrow
key
while the remote
system is ON but the flame is OF
F,
the flame will
come on in the high position, A single "beep" from
Figure
3 1 -
Remote Control Displaying Flame Levels
Flame Height Control
Figure
3 2 -
Remote Control Displaying Room
Temperature and Set Temperature