Woodbridge DVI 750 (N, Инструкция по установке и эксплуатации

Страница: 13 / 40

14
48D0139
VENT INSTALLATION
MANIFOLD REMOVAL AND INSTALLATION
The manifold is shipped attached to insert. It may be removed to allow tight installation. Mani-
fold may be loosened and rotated for desired pipe location.
1. Remove brick liner and baffle.
2. Remove manifold. Place manifold
in fireplace.
7. Remove any slack from flex
vent.
Manifold
Chimney
Flex Vent
Extra 3"
(914mm)
Manifold
Flex Vent
Chimney
Manifold
Chimney
Excess
Flex Vent
Slack in
Flex Vent
Manifold
Bracket
Nut
Insert
Excess Slack Taken
Out of Flex Vent
Vent
Termination
Chimney
9. Replace
baffle and
brick liner.
Bracket
Nut
3. Route flex vent through chimney
from above. See Figure
7
. Leave
an extra 3" (914mm) at the top.
4. Attach flex vent to manifold.
See
Figure
8
. Seal with silicone and
attach with screws.
Figure
7
- Placing
Manifold Into Fireplace
Figure
8
- Attaching
Flex Vent to Manifold
5. Place manifold in an upright
position. Have someone pull on
the excess flex vent.
Figure
9
.
Temporarily attach flex vent
to top of chimney. Leave some
extraslack in flex vent.
6. Slide insert into place. Guide
the manifold over the insert
until it is fully in place.
Figure
10
.
Attach manifold to insert.
Figure
10
.
8. Remove any excess slack in
flex line. Attach vent termina-
tion.
Figure
10
.
Figure
9
- Pulling On
Excess Flex Vent
Figure 1
0
- Sliding Insert
Into Place
1
3