Setup and Operation
Two-person operation
3
3-6
doc011422
Setup and Operation
See Figure 3-4.
6.
Use the air valve to adjust the table approximately one board thickness plus1/4 inch (6
mm) below the blade.
Air valve controls: Neutral is the 3 o’clock position. Raise the han
-
dle up to raise the table; lower handle to lower table. Always return
the handle to the neutral position.
7. Operator 1:
Place the pallet on the table with the deck side down and against the fence.
8. Operator 1:
Start the blade.
IMPORTANT!
Only one person should have contact with the pallet
while cutting.
FIG. 3-4
DM201-2
Operator 1 station
Pass back bars
Operator 2 station