Setup and Operation
Operation
3
3-2
doc011422
Setup and Operation
3.3 Operation
DANGER!
Keep hands 12” away from the blade. Failure to do so
will result in death or serious injury.
WARNING!
Do not load pallets greater than 60”
(1.5 m). Failure to do so may result in death or
serious injury.
WARNING!
Avoid contact with sharp edges of
the cutting wedges. Failure to do so may result in
death or serious injury.
WARNING!
Check that the tire pressures are
between 50-55 psi. Failure to do so may result in death or serious
injury.
FOR GAS ENGINES
DANGER!
Do not operate this unit indoors or in an enclosed area;
carbon monoxide poisoning will occur. Failure to do so will result in
death or serious injury.
One-person operation
IMPORTANT!
Before starting, ensure the blade is tensioned prop
-
erly. Failure to do so may result in drive wheel tire damage.
6.
Tighten the tension by ratcheting the device handle until the pivot arm is touching the stop
bolt.
NOTE: If a new blade is required see Section
.