Wood-mizer MP160, Руководство пользователя

Страница: 31 / 42

MAINTENANCE
Long-term storage
MAINTENANCE doc121819 4-3
4
4. Using two chain tension adjustment bolts (C), adjust properly drive belt. Next tighten a motor plate
mounting bolts. Mount cutter drive belt cover.
5. Check motor and cutter pulleys alignment. Both pulleys should be in line to avoid premature drive
belt wear. Loosen set screw on the shaft to move pulleys. After pulleys alignment, recheck the belt
tension.
4.4.2 Roller drive chain tension adjustment
1. Unbolt and remove roller drive chain cover (A).
2. Loosen tensioner bolt (B). Move the tensioner up/down to tension the chain properly.
4.5 Long-term storage
If the machine is not used for a long period of time, do as follows:

Disconnect the power cord.

Perform all routine actions described above.

Remove the knives with mounting strips or clamping wedges and store them well lubricated in
above zero temperature.

Loosen the motor belt tension.
FIG. 4-2
A
B