Wood-mizer MP160, Руководство пользователя

Страница: 14 / 42

Safety
Planer/moulder operation
2
2-4 EGdoc121819 Safety
DANGER! Always be aware of and take proper protective measures
against rotating shafts, pulleys, fans, etc. Always stay a safe distance
from rotating members and make sure that loose clothing or long hair
does not engage rotating members resulting in possible injury.
WARNING! Beware of rotating parts. Shut down the sawmill and allow
all moving parts to come to a complete stop before removing any
guards and covers. Do NOT operate planer/moulder with any guards
or covers removed.
DANGER! Before changing the knives or performing any service to
planer/moulder, disconnect the power cord from the electric box.
IMPORTANT! Knife and feed assembly covers are equipped with limit
switches. After opening the cover, engine will turn off and all moving
parts will stop. Limit switches should be always in proper working
condition.
Planer/moulder operation
CAUTION! The workplace always should be good illuminated. The
illumination at the operator's position should be at least 300lx. Never
use the planer/moulder under the influence of strong medication,
alcohol or any other strong drugs.
WARNING! Make sure the knives are properly fastened before starting
the motor.
WARNING! Never place tools or hands into the in or outfeed areas
when the planer/moulder is running.
IMPORTANT! When starting the machine for the first time, check that
cutter rotation direction is as indicated by the arrow located on the side
cover. If the rotation direction is incorrect, invert the phases in the
phase inverter in the power socket (electric box). Setting the phases in
the phase inverter correctly will ensure correct rotation directions of
cutter.
DANGER! Always measure the workpiece and set suitable thickness
and width before planing. There is a risk of accident if you feed in a
workpiece that is not high enough for the feed rollers to get hold of it.
!