manualshive.com logo in svg

Wood-mizer MF130 E3S, Руководство пользователя, Страница: 30 / 45

Поделиться
Скачать
Wood-mizer MF130 E3S Скачать руководство пользователя страница 30

OPERATION

Cutter

4

4-4

EGdoc121421

4.2.2 Cutter

DANGER! 

Always be aware of and take proper protective measures

against rotating shafts, pulleys, fans, etc. Always stay a safe distance
from rotating members and make sure that loose clothing or long hair
does not engage rotating members resulting in possible injury.

WARNING!

 Make sure the tools installed in the additional cutter are

properly fastened before starting the motor.

IMPORTANT!

 When starting the machine for the first time, check that

cutter rotation direction is as indicated by the arrow located on the side
cover. If the rotation direction is incorrect, invert the phases in the
phase inverter in the power socket (electric box). Setting the phases in
the phase inverter correctly will ensure correct rotation directions of
cutter. It is allowed to use the machine only if all cutters are rotaing in
the direction opposite to the feed direction.

IMPORTANT!

 Tools and shaft mounted in the additional cutter must be

rated to work with speed up to 14.000 r.p.m.

Addtional cutter can be used for fine planing, moulding, profiling at various angles, brushing and
grinding.

!

!

Содержание MF130 E3S














































Отзывы:

Нет отзывов