manualshive.com logo in svg

Wood-mizer MF130 E3S, Руководство пользователя, Страница: 12 / 45

Поделиться
Скачать
Wood-mizer MF130 E3S Скачать руководство пользователя страница 12

Safety

Safety Instructions

2

2-3

EGdoc101521

Safety

Keep the machine and area around clean.

DANGER! 

Maintain a clean and clear path for all necessary movement

around the Moulder and lumber stacking areas. Failure to do so will
result in serious injury.

Dispose of sawing by-products properly.

IMPORTANT! 

Always properly dispose of all sawing by-products,

including sawdust and other debris.

CAUTION!

 The work-stand of the Moulder should be equipped with a

4 kg or bigger dry powder extinguisher.

Check the Moulder before operation.

DANGER! 

Make sure all guards and covers are in place and secured

before operating the Moulder. Check that all handles, screws, nuts,
tailstocks, sleeves, saw blades etc. are properly tightened. Check that
the saw blade can rotate freely and that there are no tools in or on the
machine before it is started. Failure to do so may result in serious
injury.

WARNING!

 Always shut off the motor to stop the cutter whenever the

Moulder is not in use. Failure to do so may result in serious injury.

WARNING! 

Do not for any reason adjust the motor drive belts with the

motor running. Failure to do so will result in serious injury.

Keep all people away.

DANGER! 

No one, except the operator, should be within 4 meters of

!

Содержание MF130 E3S














































Отзывы:

Нет отзывов