Sawmill Operation
Preparing The Sawmill For Towing
Sawmill Operation
WMdoc072919
4-33
4
impossible timbers to be cut by significantly reducing resin buildup on the blade. It helps
to reduce heat buildup, wavy cuts, and blade noise. This biodegradable and environmen-
tally friendly pre-mix includes a water softener additive, so it works with hard water.
WARNING!
Do not use flammable fuels or liquids such as diesel fuel. If
these types of liquids are necessary to clean the blade, remove it and
clean with a rag. Failure to follow this will result in serious injury or
death.
CAUTION!
Use windshield washer fluid to the water tank and prime as
recommended when sawing or storing the sawmill in below-freezing
temperatures. Use windshield washer fluid with a freezing point of at
least -20°F (-29°C). Failure to follow this may cause damage to the
LubeMizer system.
4.20 Preparing The Sawmill For Towing
Securing the mill
1.
Move the saw carriage to the front (hitch end) of the sawmill.
2.
Raise the rear outriggers to their fully compressed position.
CAUTION!
Do not adjust the outrigger base height while there is
weight on the outrigger. Damage to the outrigger may result.
See Figure 4-21.
3.
Move the log clamp all the way in toward the main bed frame tube.
4.
Lower the log turner arm below the bed level.
FIG. 4-21
LX0006-04
Locking Pin
