Sawmill Setup
Replacing The Blade
3
3-33
WMdoc072919
Sawmill Setup
See Figure 3-13.
The cutting teeth should be pointing toward sawdust chute.
4.
Install the blade so it is lying around the wheels.
5.
Position 1 1/4” wide blades on the wheels so the gullet is 1/8" (3.0 mm) out from the edge
of the wheel. Position 1 1/2” wide blades on the wheels so the gullet is 3/16” (4.5 mm) out
from the edge of the wheel.
See Figure 3-14.
6.
Use the tension handle to tension the blade correctly (2800-3000 psi).
FIG. 3-13
FIG. 3-14
LX0010
1 1/4” wide blades 1/8" (3.0 mm)
1 1/2” wide blades 3/16” (4.5 mm)
