Operation
REF functions (temporary referencing the blade location)
4
4-18
doc042607
Operation
illuminate). To make the cut, use the left joystick as described above.
After turning the cant again and levelling it on the sawmill bed, activate HEAD mode
again and press the
REF2
button twice (the button light will start flashing). The REF
LOCK function will turn on automatically (the REF LOCK button will illuminate). When you
push the left joystick appropriately, the saw head will automatically position for the next
cut referenced from the last cut made in REF2 (determined by the selected board
thickness).
When REF LOCK is enabled (REF1 or REF2 is activated), two functions can actually be
performed. One of them is the NEXT CUT function explained above (it is active when the
REF1 or the REF2 button is flashing). The other function can be enabled by pushing the
flashing REF1 or REF2 button again, or by pushing the REF LOCK button with the NEXT
CUT function activated. When it is active, the lights of REF LOCK and REF1 or REF2
buttons
are on steady state
. See the example below for an explanation of how this
function works.
