Operation
Performing Head Functions
Operation
doc042607
4-9
4
See Figure 4-7.
Using the right joystick, you can also move the debarker (optional
sawmill equipment) against or away from the log. To move the debarker in or out, press
and hold the top button on this joystick and then push the joystick as shown below.
NOTE:
Once the saw head passes the front or rear limit switch on the bed frame, it immediately
stops. To move the saw head against the front or rear rubber stop, pull the right joystick
toward you or push it away from you and, holding the joystick in this position, press and
hold its top button. The saw head will approach the rubber stop at a low speed.
This is
especially essential when sawing full-length logs.
FIG. 4-7
Debarker
In
Debarker
In
Debarker
Out
Debarker
Out
