Sawmill Operation
Preparing The Sawmill For Towing
4
4-19
30S97doc041910
Sawmill Operation
2.
Release the blade tension.
CAUTION!
Changes in temperature could cause increased
pressure in the blade tensioner and loss of fluid from the
gauge. Release the blade tension when the mill is not in
use to avoid damage to the tensioner.
3.
Move the carriage forward to the travel position over the rear bed rail.
4.
Position the hole in the saw head over the travel rest pin.
5.
Lower the saw head until it is seated firmly on the rest pin.
See Figure 4-10.
6.
Continue lowering the head 3/4" (19mm) until it contacts the stop blocks on the mast rails.
CAUTION!
It is important that the lower stop bolts are prop-
erly adjusted to secure the carriage on the track rail. Failure
to properly adjust the stop bolts can cause saw head dam-
age, especially during mill transportation.
FIG. 4-10
