Sawmill Setup
Board Return
Sawmill Setup
30S97doc041910
3-13
3
3.7
Board Return
WARNING!
The automatic board return is intended to
assist a second operator in removing boards quickly. Do not
use the board return when operating the sawmill alone.
Serious injury, death or damage to the equipment may
result.
WARNING!
Never use the board return table as a platform
to stand on. This table is designed and intended to assist in
the removal of boards only. Standing on the table may
result in serious injury.
Super sawmill models are equipped with a board return system. This system consists of
an arm on the saw head controlled by a toggle switch on the control panel. A board return
table is also provided to catch the board as it is removed from the log.
To install the board return table, remove the two pins securing it in its storage position at
the rear of the sawmill.
FIG. 3-6
Remove pins and lift
table from storage
position
3H0435
