Sawmill Operation
Loading, Turning And Clamping Logs
Sawmill Operation
30S97doc041910
4-2
4
To Turn Logs
1.
Use cant hooks or the optional log turner to rotate the log on the sawmill bed. See
Log
Turner Manual
.
2.
Spin the log against the side supports until it is turned the way you want it for the first cut.
To Clamp Logs
1.
Position the log clamp in the bracket in the hole closest to the log.
2.
Move the clamp down far enough so that it is below your first few cuts. Pivot the clamp so
that it moves the log firmly against the side supports. Lock the clamp in position with the
locking chain.
See Figure 4-1.
3.
Make sure the side supports are positioned low enough for the blade to pass over them. If
they are not, back the clamp off slightly and push the side supports down until they are
positioned below the level of your first few cuts.
4.
Use the optional toe boards to level the log if desired. See the manual supplied with the
manual toe boards for details concerning toe board operation.
To Level A Tapered Log
Use the optional toe boards to raise either end of a tapered log, if desired. See the Toe
Board Option Manual for operating instructions.
FIG. 4-1
