92
3.9.2 RIPv2
WoMaster Industrial Router is supported with RIPv2. The Routing Information Protocol (RIP) is a distance-vector,
interior gateway (IGP) routing protocol used by routers to exchange routing information. RIP uses the hop count as a
routing metric. RIP prevents routing loops by implementing a limit on the number of hops allowed in a path from the
source to a destination. The maximum number of hops allowed for RIP is 15. This hop limit, however, also limits the
size of networks that RIP can support. RIP version 2 (RIPv2) was developed due to the deficiencies of the original RIP.
3.10 WARNING
WoMaster’ router provides several types of Warning feature for remote monitoring of end devices status or network
changes.
3.10.1 EMAIL ALERT
WoMaster router supports E-mail Warning feature. With this function being enabled, the user is allowed to
configure the detail settings for sending the e-mail alert to the SMTP server when the events occur. This page allows
User to enable E-mail Alert, assign the SMTP Server IP, Sender E-mail, and Receiver E-mail. If the SMTP server
requests User to authorize first, User can also setup the username and password on this page.
The description of the columns is as below:
TERMS
DESCRIPTION
Email Alert
Check the to enable the function
SMTP Server IP Address
Enter the IP address of the Email Server
Email Account
Enter the Email Server Account
Authentication
Choose the Authentication mode (None, Plain, Login)
User Name
Enter email Account name (Max.40 characters)
