84
Port
Default: 1194
Input the port number that VPN service used. Please check the VPN Server
port setting. The range from 1-65535.
Tunnel Protocol
Choose use TCP or UDP to establish the VPN connection.
Encryption Cipher
Select the encryption cipher from Blowfish to AES in Pull-down menus.
Hash Algorithm
Hash algorithm provides a method of quick access to data, including SHA1
，
SHA256
，
SHA512
，
MD5
ping-timer-rem
Default: Enable
Select enable or disable the ping-timer-rem, this function prevent
unnecessary restart at server/client when network fail.
persist-tun
Default: Enable
Select enable or disable the persist-tun, enable this function will keep
tun(layer 3) device linkup after Keepalive timeout.
persist-key
Default: Enable
Select enable or disable the persist-key, enable this function will keep the key
first use if VPN restart after Keepalive timeout.
LZO Compression
Default: Disable
Select use LZO Compression or not, this function compresses data to decrease
the traffic but also need more CPU effort.
Keepalive
Default: Enable
Select enable or disable Keepalive function, this function is use to detect the
status of connection.
Ping Interval
Default: 10
Input the ping interval, the range can from 1~99999 seconds.
Retry Timeout
Default: 60
Input the retry timeout, the range can from 1~99999 seconds.
nobind
Check the box to activate nobind function. With nobind function, the source
ports are random.
ifconfig
Input the tunnel IP addresses that VPN use.
Route
Input the route IP and MASK. This is the target IP domain that user can access
through the VPN tunnel.
Save Log File
Click Save to keep the VPN Client Log.
Click
Submit
to apply the configuration
.
