11
2.2
INSTALLATION
After unpack the box, follow the steps below in order to properly connect the device. For better Wi-Fi performance,
put the device in a clearly visible spot, as obstacles such as walls and doors hinder the signal.
1. First, assemble router by attaching the necessary antennas and inserting the SIM card.
2. To power up router, please use the power adapter included in the box.
2.3
WIRING THE POWER INPUTS
Power Input port in the router provides 2 sets of power input connections (P1 and P2) on the terminal block. On the
picture below is the power connector.
Wiring the Power Input
1.
Insert the positive and negative wires into the V+ and V- contact on the terminal block connector.
2.
Tighten the wire-clamp screws to prevent the power wires from being loosened.
3.
Connect the power wires to suitable DC Switching type power supply. The input DC voltage should be in the
range of 12VDC to DC 48V DC.
WARNING:
Turn off DC power input source before connecting the Power to the terminal block
connectors, for safety purpose. Don not turn-on the source of DC power before all of the
connections were well established.
WARNING:
Using a different power adapter can damage and void the warranty for this product
