22
The description of the RADIUS Authentication interface is as below:
TERMS
DESCRIPTION
RADIUS Server IP
Radius Server IP Address
Shared Key
Shared key are used to verify that RADIUS messages, with the exception of
the Access-Request message, are sent by a RADIUS-enabled device that is
configured with the same shared key. Shared key also verify that the
RADIUS message has not been modified in transit (message integrity).
Server Port
Set communication port of an external RADIUS server as the authentication
database. The general value is 1812
The Terminal Access Controller Access Control System () security protocol is a recent protocol developed by
Cisco. It provides detailed accounting information and flexible administrative control over the authentication and
authorization processes. allows for a single access control server (the daemon) to provide
authentication, authorization, and accounting services independently. Below is the interface for TACPLUS and
TACPLUS to Local authentication mode. For the TACPLUS to Local mode, the authentication will try remote
authentication first, falling back to local authentication mode if remote mode fails or cannot be reached.
H
ow to set up a server:
a.
Select the
Authentication Type.
b.
Enter the
Authentication Timeout
in seconds.
c.
Enter the IP address of the server in
Server IP Address.
d.
Enter the
Shared Secret
of the server.
e.
Enter the
Server port
if necessary, by default
server listens to port 49.
