61
Channel Mode
Default: 20MHz
There are three channel modes, 20MHz, 20/40MHz and 40MHz. If user select
20MHz, the frequency that can be received maximum is 20MHz. For
20/40MHz it can receive both frequency, and for the 40MHz, it provides
bigger data rate and received the 40MHz frequency. But basically, if the
transmission happened between the AP and the client, both AP and client can
have the negotiation phase about the frequency.
Maximum Output Power
Default: Half
Specify the transmission power. For the higher output power, it can cover the
signal widely and of course may need big power consumption. The Full output
power may need the antenna.
Data Rate
Default: Auto
Select the specific data rate in order to control the transmission rate.
Auto
is
preferred rate, the access point will automatically select the highest available
rate to transmit. User may select the low rate when there is no great demand
for transmission speed, for long distance transmission.
Extension Channel
Protection
Select from the dropdown list option between
CTS-Self or RTS-CTS
to avoid
conflict with other wireless network and to improve the ability of the device
to catch all the wireless transmissions. By activate this function it may
decrease wireless network performance.
